An electric razor is no longer a new product, and those males who prefer this device to conventional razors know its advantages. Electric shavers require neither water nor special means for shaving, due to which they are more mobile, which is especially valuable when traveling. When shaving with an electric razor, the skin is less irritated and the possibility of cuts is eliminated. Those devices that have a self-cleaning function are considered almost ideal.

Razor blades may require sharpening during use. Nowadays devices with self-sharpening blades are produced, but even they, although later, fail. To solve this problem, it is not necessary to contact a specialist or purchase new blades. You can sharpen your razor blades yourself. By choosing one of the sharpening methods and strictly following the instructions, you can extend the life of the blades for at least another year, thereby saving on the purchase of new ones.

Ways to sharpen a razor at home

Electric shavers are either rotary or mesh. Regardless of the type of device, stainless steel knives are coated with a layer of titanium or ceramic to avoid allergies. Of course, if you have doubts about the possibility of sharpening knives yourself, it is better to contact a specialist, or you can use one of the “folk” ways to solve the problem.

Sandpaper method

To sharpen the blades, you will need sandpaper with a grit of 1200 and 2500. To sharpen the knives, you need to remove them. First, the knives need to be sanded with 1200-grit sandpaper. To do this, place them on the paper, insert the razor shaft or cardan, press and turn on for 10 seconds. Next, the same thing needs to be done using 2500-grit sandpaper. After these manipulations, you need to clean everything and reassemble it in the reverse order. For greater efficiency, it is better to take sandpaper without a soft backing.

Reference. This sharpening method is suitable for those razors that cannot be sharpened using GOI paste, for example, for the Era-100 electric razor.

Method using GOI paste

GOI paste appeared almost a hundred years ago, and all this time it has been successfully used for polishing metals, including steel, ceramics, stone and some other surfaces. The popularity of this polishing product is explained not only by the excellent results after use, but also by its affordable cost. GOI paste is available in 4 types:

for rough polishing;
to give the surface a matte finish;
for finishing and adding gloss.

GOI paste cannot be applied directly to a metal surface; you can use a soft cloth for this or pre-dilute the paste with any solvent.

Sharpening stages:

Using any container, the paste is diluted with vegetable oil.
Add available solvent.
The knife block of the electrical appliance is immersed in the solution.
Turn on the electric razor for the period that it usually takes to shave.
After all manipulations, wipe the knives.

After this treatment, the razor blades will be like new.

Important! If the blades have recently been changed, then before starting use it is necessary to grind them with GOI paste.

Sharpening method using glass and a screwdriver

To sharpen knives in this way, you need ordinary glass and a screwdriver or drill with reverse.

Important! To sharpen blades in this way, it is necessary to use reverse reverse - clockwise movement will only dull the knives even more.

The blade, previously removed from the razor, must be placed on the glass and sharpened using a triangular nozzle and reverse reverse. The screwdriver should operate at low speeds, the whole process will not take more than 5 minutes.

Let's sum it up

Using one of the above methods, if you have certain skills and patience, you can sharpen the razor blades yourself, which will extend their service life by long time. The results of sharpening carried out at home, subject to all rules and recommendations, may not be inferior to the results after professional processing. Practice shows that when sharpening blades using GOI paste, they will work flawlessly for at least a year.

Eat tricky way, thanks to which the blade of your razor or razor will become as sharp as before, in just a couple of minutes! Anyone who has used shaving machines at least sometimes knows that after 1-2 uses the machine loses its former sharpness and shaving dynamics, you have to buy a new attachment or endure unpleasant pulling of the hair while shaving.

But if disposable ones can still be updated, then this will not work with expensive nozzles from branded brands, they are not cheap. Fortunately, there is a way to sharpen them, without special equipment, at home. To do this, you will need old jeans and the machine itself with dull blades.

How to sharpen a razor: stage 1

First, dry the machine dry by blow drying it. Take your jeans and place them evenly on the table. Then take the machine and begin to smoothly but evenly move along the fabric of the jeans, using the entire plane of the machine. Swipe 20 times in one direction.

How to sharpen razor blades: step 2

Now change the direction and also move 20 times in the other direction, no longer shaving but stroking them with a razor head.

Sharpening a razor blade at home until sharp: stage 3

That's it! You can blow air out of the lint and try the result! The blade is as sharp as new again.

If only I had known this trick earlier, I could have saved a lot of money, especially with disposable machines that had to be thrown away after a single use. Your friends will probably be interested in learning about this method if you share it with them using the sharing buttons on Facebook and VKontakte below.

The availability and convenience of razors has led to them being extremely popular among both men and women. But it’s not enough just to choose a good razor, you also need to use and store it correctly so that it lasts longer and performs its functions efficiently. That’s why owners have questions about how to sharpen a razor so that the procedure gives the maximum results. good result.

Most users do not try to sharpen blades at home, thinking that it is difficult and unlikely. But some still decide to find such methods and extend the life of the razor.

Such methods do exist and are quite effective at home. Although, of course, a razor blade is not a knife, it in the usual way it will not be possible to update.

Why sharpen your blades yourself?

The question of the appropriateness of sharpening procedures for razor blades is relevant, and there are several answers to it. Firstly, it allows you to extend the life of the machine. That is, instead of throwing away the razor, you can renew it and use it for the same amount of time.

Secondly, it saves money. After all, purchasing replacement cassettes regularly requires significant financial investments. And sharpening and updating them will help put off going to the store for at least a few months.

Thirdly, it is not always possible to buy replacement cassettes, but shaving is safe and sometimes just urgently needed. In order not to put off shaving until you buy a new blade, you can sharpen it and enjoy the result.

Sharpening a razor is a useful and convenient skill that can save money. Having tried to use any of the blade sharpening methods once, each user will be able to learn and perform the procedure quickly and efficiently.

Using a special sharpening device

Demand always creates supply, so not long ago special devices for sharpening blades at home appeared on the market. The device is a handle equipped with a small strip of plastic, on the surface of which a special abrasive is applied. It allows you to sharpen disposable and reusable razors with equal efficiency, extending their service life several times.

A prominent representative of such devices is the RazorPit device from a Danish company, although it also has a cheaper analogue of Zattoch Ukrainian production. The devices are easy to use and give good results. The sequence of actions includes the following steps:

Apply a little to the surface of the device cosmetic product– gel or foam.
Use the cutting part of the razor to move along the abrasive in the direction opposite to how the razor moves during the shaving process.
Depending on how long you use the machine, 25-30 movements are enough to get the blades sharp again.

The procedure is simple and effective, but you need to understand that the razor sharpening device itself also costs money. It may be cheaper to update replacement cassettes on the machine.

Sharpening the blade using denim

Instead of a blade sharpener, you can use denim or any ribbed fabric. The effect of this procedure is practically no different from using special devices, but it is cheaper and simpler. The procedure is as follows:

Jeans need to be turned inside out.
Under a small piece of fabric you need to place some kind of dense thing - a cardboard cylinder, a wooden block or a ruler.
Jeans are usually made from bias-cut fabric, so the thick lining needs to be laid flat. If the jeans are sewn straight, then the base must be fixed diagonally.
The razor is drawn across the fabric in the opposite direction to a normal shave. This sharpens the blades and keeps the fabric intact.

You can repeat the blade sharpening procedures several times until the steel becomes so thin that it can no longer be restored. But before this happens, you can use the machine much longer without spending much money.

If you need to sharpen the blades of an electric razor, it is better to contact a specialist. Its peculiarity is that for any action the razor will have to be partially disassembled, which means that then it will need to be assembled. For a beginner, this is not always a simple and easy procedure. But sharpening the blades of a conventional machine is a very real process that is worth trying at least once.

Numerous manufacturers of men's accessories and shaving accessories offer disposable and reusable razors with blades made of quality materials. But sooner or later, any blade will begin to lose its properties, especially if you do not provide the machine with decent care, proper operation and storage. In this regard, experts offer many techniques for sharpening machine blades, many of which can be used at home.

About how to sharpen Shaver at home, many men know, since several ancient methods have been practiced for many years. Today, many new ideas have been invented that also sharpen blades quickly and easily, extending their service life. It is only important to follow all the details and instructions, otherwise you may damage the sharp cutting surface.

Many men believe that sharpening blades for a machine is an unlikely or completely useless task. Especially considering the fact that there is a huge assortment of new blades and cassettes on sale in stores. In fact, razors High Quality They cost a lot of money, as do blades for such models. Therefore, experts recommend saving money and sharpening blades, unless, of course, you use a cheap disposable razor.

Have you ever sharpened your razor?

YesNo

Only a few types of razors can be sharpened using this method:

disposable machine;
reusable razors with cassettes;
T-shaped machines.

If, in addition to proper use and care, the blades are sharpened, a man will be able to provide himself with high-quality wet shaving and save money on the purchase of a machine or blades. Otherwise, the blades will not only cut hairs poorly and pull them out, but also scrape off the top layer of skin. An important condition for sharpening is to follow the instructions for all stages, otherwise you can dull the cutting surface even more.

For reference! If a man does not have the skills and knowledge of how to sharpen razor blades, you can contact a specialist who has in his arsenal a machine for sharpening razor blades and other devices for professional sharpening.

Step by step guide

Today, the most pressing request from men in forums and communities is as follows - how to sharpen the blades of a Vest razor. This manufacturer offers high-quality machines with replaceable cassettes, which you can easily extend the shelf life yourself, without the help of a specialist. Most often, two devices are used for this action - a pyramid razor blade sharpener or ordinary denim.

You can make a pyramid yourself from a material that is incapable of magnetization, for example, plexiglass or cardboard. It is secured with glue or tape; it is prohibited to use metal fasteners. Further sharpening is carried out as follows:

mark the pyramid on a hard, straight surface;
then the pyramid is oriented to the cardinal points;
the razor blades should be placed along the pyramid in the north-south direction;
the blades should lie in this state under the pyramid for 6-8 hours.

The same method can be used to sharpen blades for cassette razors such as Gillette and other brands.

Many men have been successfully practicing the technique for many years, noting its ease of use and high efficiency. Using a special device from RazorPit or Zattoch, blades on a cassette or removable blades are sharpened as follows:

Apply a little shaving gel to the surface of the device;
further along the abrasive surface, but in the opposite direction, as during shaving, movements are made with the machine;
make 25-30 such movements at a time;
At the end, the machine and working fixture will need to be rinsed with water.

Just 5-10 minutes of such manipulations will be enough to revive the blades of the machine and give the razor a second life. This will not only save money, but also provide a man with high-quality and effective shaving of stubble and mustache without irritation or other consequences.

Handy tools to help

If a device such as a razor sharpener is not suitable for a man, you can use improvised means, for example, denim. This is one of the first methods that was invented by men many years ago. It is enough to simply turn the fabric inside out, and then run the loom with the blades inside against the direction of the fabric threads 30-40 times, but without pressing.

Another handy method is a leather belt, and sharpening the blades follows the same scenario as with denim. You need to choose a belt that does not have frayed areas or creases, otherwise the surface of the blades will be damaged. You need to move the blades along the belt from its wrong side. This will maintain the integrity of the painted side of the belt while improving the functionality of the machine.

Is it important to use special devices?

In fact, any selected razor sharpener must be approved by experts, since leather belt, pyramid or denim. Other unfamiliar techniques and untested means at hand can easily damage the integrity of the blades, since we are talking about a metal plate with a thickness of 0.5 mm or less. Although there are many razor sharpeners sold online, only a few actually do the job.

Conclusion

Razor accessories all have their own service life, which depends on the materials used in the production of the razor itself and the quality of the blades in it. Disposable razors are used no more than 1-3 times, but T-shaped razors and reusable razors will last longer if you change the cutting parts on time. And in order not to waste money on buying new “feathers”, you can sharpen them in a timely manner. To do this, you may need a special device, as well as a pyramid of improvised materials, a leather strap or denim.

Almost everyone knows that a straight razor needs to be sharpened constantly. But few people know how to sharpen a razor on jeans. With the advent of disposable and reusable (cassette) razors, people gradually began to forget about sharpening blades. But it turns out that it is also quite possible to sharpen a razor, significantly extending its life. Considering that cassettes for a good reusable razor are quite expensive, this skill will not be superfluous and will save money.

How to sharpen a razor with improvised means

The razor has been a personal hygiene item for several centuries. The first special hair removal device, the straight razor, had to be sharpened before each use. Moreover, its blade was aimed at the belt directly during shaving.

Modern technologies have made it possible to create safe shaving machines. Many of them, such as "Vest" or "Chic", can be used repeatedly. But even branded cassettes gradually become unusable and require replacement. Each blade of the cassette is made of high-strength steel, but it still becomes dull over time and develops burrs, which leads to a painful shave and skin irritation.

Good cassettes for reusable machines (for example, “Vest - 3”) are quite expensive, and sometimes (for example, on a business trip or on vacation) there is simply no time or nowhere to buy them. It turns out that you can easily extend the “life” of a cassette. All you need is jeans and a little patience. If the denim item will serve further, then sharpening should be done on the wrong side. For these purposes, thick ribbed denim is best suited.

The sharpening procedure is as follows:

Turn your jeans inside out to avoid ruining the item.
Spread them on a flat surface.
Place a foil roll, a flat narrow block, a narrow ruler or another flat object under the fabric, the width of which is less than the length of the cutting part in the cassette. This necessary condition, since there are protrusions along the edges of the cassette that will not allow you to sharpen the blade on a flat surface. The spacer must be placed under the fabric so that the fabric ribs run diagonally.
Place the cassette blade on the block and move it along the fabric in the direction opposite to that in which the machine moves during shaving. And so we grind the blade 50 times, moving it only in one direction.
We unfold the razor and similarly grind the cassette on the jeans, now moving it in the other direction.

After this procedure, you will be able to shave comfortably again. By periodically sharpening cassettes, you can significantly extend their service life. In this way, you can sharpen both disposable razors and branded razors, such as “Vest”.

Instead of denim You can use a strip of leather of the required width, cut from an old belt or an unnecessary leather item. You should sharpen on the reverse – unpainted side of the leather. Sharpening occurs somewhat faster than on fabric. 20-30 passes in one direction will be enough. There is no need to sharpen in the opposite direction, as with jeans.

Special sharpening devices

Currently, special devices have begun to appear on the market, with the help of which you can easily sharpen the blade of any razor - both budget and reputable.

The simplest of them are designed for manual sharpening. The method is reminiscent of straightening denim. Only instead of jeans, it uses a strip of special plastic mixed with the smallest abrasive, laid on a convenient base in the form of a block. Such devices include RazorPit (manufacturer – Denmark) and Zattoch (Ukraine). According to manufacturers, with regular sharpening, a cassette inserted into the Vest machine can last 5-10 times longer.

The same devices can be used to sharpen disposable razors. The process is also very similar to sharpening blades on fabric. Place a drop of shaving gel or foam on the abrasive strip, and then run the cutting part along it in the direction opposite to the movement of the machine when shaving. 20-30 movements are enough for the blade to become sharp.

If you don’t want to sharpen your razor by hand, you can purchase a sharpening machine, such as Save A Blade from Bradex (analogue - Blade Saver made in China). This small, battery-powered device can quickly sharpen razor blades. It is enough to place the cassette in a special compartment, secure it, and turn on the machine for 5-10 minutes. The device is universal and suitable for sharpening any cassette razors.

If work to restore the razor's sharpness is carried out manually, then it must be taken into account that the blades in the cassettes are thin and can be broken if handled carelessly. It is necessary to move the cassette along the sharpening surface smoothly, without force, without pressing on the machine.

Sharpening blades in razors will significantly extend their service life, make shaving more comfortable, and also help save a certain amount of the family budget.

Weight loss